For setting and checking the cut-off torque of electric and pneumatic screwdrivers
Bolting simulator for use with the DRT1 reaction torque transducer. Can be permanently installed via flange mounting or plugged into the ¼" square adapter of the DRT1. This simulator is the right tool to test your screwdrivers. 5 different compression springs are supplied for the various performance classes of the screwdrivers, the dynamics of which are shown in the diagram below.
Setting ranges: 0,2 - 2 Nm | 5 - 20 Nm
Screwing simulator for setting and checking the cut-off torque of electric and pneumatic screwdrivers
The screwing simulator is particularly suitable for checking the repeatability of impulse and electric screwdrivers after a repair or for checking the setting range.
By optionally installing the spring assemblies, different degrees can be achieved:
Setting ranges
20 - 100 Nm | 200 - 300 Nm
Step-file (63 Nm) Step-File (100 Nm)
Further step files on request!
Screwing simulator for setting and checking the cut-off torque of electric and pneumatic screwdrivers
Screw connection simulator with 1/4" hexagon drive for use with the reaction torque transducer DRT1. Permanently mountable via flange mounting. Different torque values and degrees can be achieved through the optional use of spring assemblies and shims.
Setting ranges 3 | 6 | 9 | 12 | 20 Nm
20 Nm (other measurement ranges on demand)
For electrically or pneumatically operated shut-off tools; easy and quick handling
For simulating hard and soft screw connections in screwing machines.
suitable for:
Configuration and testing of tools before screwing;
for electric or pneumatic switching-off tools;
Simply hold on to the automatic screw driver.
For active and passive application
Bolting simulation and testing facility for hydraulic tools
Measuring range: up to 10,000 Nm (other measuring ranges possible on request)
suitable for
- Adjusting and checking tools before bolting
- Creation of torque tables
- Test equipment monitoring according to DIN EN ISO 9000f
Option: active