Cheap and short
torque sensor "DRBK"
with speed measurement
inexpensive; sufficient
for many applications!
11 torque range
from ± 0 - 0,5 Nm to ± 0 - 1000 Nm
-
Features
- Low cost.
- Very short.
- Broad input voltage range.
- Current output and voltage output.
- Optional speed measurement.
- Measurement accuracy: ≤ 0,5% of full scale.
- Torque ranges from 0,5 to 1000 Nm.
- Multipurpose use.
- Contactless transfer of measurement signal.
- Integrated signal amplifier.
- Proven strain gage technology.
- Single power supply.
Measurement range/model 
Please select the
measuring range as small as possible and as large as necessary. To help keep resulting measurement error as low as possible! |
|||||
| model | DRBK-... | DRBK-... | DRBK-... | DRBK-... | |
| torque range (0 - ... Nm) |
0,5 1 2 |
5 10 20 |
50 100 200 |
500 1000 |
|
 |
|
|
|
||
| Technical specifications | |
| Supply voltage | 11,5 till 30 V DC |
| Power consumption | approx. 200 mA |
| Rise time 10-90 % | 1 ms |
| Limit frequency -3dB | 1 kHz |
| Voltage output Internal resistance |
0 to ± 5 V 100 Ω |
| Current output Burden |
10 ± 8 mA approx. 500 Ω |
| Ripple | < 50 mVss |
| Nonlinearity | < 0,3 % |
| Hysteresis | < 0,3 % |
| Deviation at zero point | ≤ ± 100 mV / ± 200 µA |
| Max. measuerment fault | 0,5 % (FS / of full scale) |
| Operating temperature | 0 - 60 °C |
| Compensated temperature | 5 - 45 °C |
| Temperature error zero point sensitivity |
0,05 % / K 0,02 % / K |
Mechanical overload |
100 % |
| Internal protection | IP 40 (DIN 40050) |
| Connection | 12pin-connector |
| Option speed (n) | |
| Output | open-collector |
| Internal pull up | 4,7 kΩ (5 V level) |
| External pull up | 24 V max / 20 mA |
| Pulses / rev: | 60 |
Works certificate with confirmation of compliance with specification. Other calibrations upon request.
| Accessories |
• evaluation device   ValueMasterBase GMV2 ValueView |
 • Cable• Coupling BKE |
