DRB1 Torque transducer for static applications with high measurement signal even at low torques

Torque sensor
for the smallest torques
"DRB-I"

3 torque range
from ± 0 - 0,02 Nm to ± 0 - 1 Nm

for static applications


    Features
  • Not impacted by axial and radial forces.
  • No maintenance needed.
  • Single supply voltage.
  • Suitable for very low torques.
  • Integrated overload protection.

    Eine Seite zurück

Description:
This transducer is designed for static, non-rotating torque measurement. It can resist axial and radial forces. It outputs a high signal even at low torques.

Torque sensor for the smallest torques  Step-file DRB-1

Technical specifications
Torque range (0 - ... Nm)   
Please select the
measuring range as small
as possible and
as large as necessary.
To help keep resulting
measurement error as
low as possible!
| 0,2 | 0,5 | 1 |
Supply voltage 12 V max.
Power consumption 35 mA max.
Voltage output 2 mV/VV
Nonlinerarity < 0,15 %
Hysteresis < 0,1 %
Deviation at zero point ≤ ± 0,02 mV/V
Internal resistance 350 Ω nominal
Compensated temperature range 5 - 45 °C
Operating temperature 0 - 60 °C
Temperature error
     zero point
     sensitivity

0,02 % / K
0,01 % / K
Mechanical overload


0,2 Nm: 400%
0,5 Nm: 200%
1 Nm: 100%
Load rating

axial 25 N
radial 50 N
Weight approx. 0,6 Kg
Connection 6pin connector
Internal protection IP40
Scope of supply:
Works certificate with 25% steps with right and left load.
Other calibrations upon request.
Available accessories
Supply and display unit
    GMV 2     Value View
       GMV2                       ValueView
couplings for torquesCables
Couplings

 

 

 

Need more info?

Call us on:
+49 (0) 7972 - 9310-0

 

 

 

 

Ordering example

DRB-I-0,2
Torque transducer
Model DRB-I
Torque range 0,2 Nm,























nach obenEine Seite zurück


























nach obenEine Seite zurück